|
|
Post by JohnPayne on Apr 15, 2009 10:20:47 GMT -5
Looking for some good flowing cast iron or aluminum heads for a big block. Let me know what you have.
Thanks.
|
|
|
|
Post by tidwellracing on Apr 20, 2009 17:03:09 GMT -5
I have 2 sets of cast iron rec.port that I would sale:1 set is virgin closed chamber heads that have never been molested since they came off the original engine.The other set has had a good port and flow done to them but they need new valves.If interested call me at 205-275-3816
|
|
|
|
Post by james "turbo" jr on May 1, 2009 8:59:17 GMT -5
hey john!
its james the guy who bought your 400 block it ended up being .040 over instead of .030 over. But i have a set of 454 heads and a factory steel crank thats standard. but have to check when i get to atmore to the shop.
|
|
|
|
Post by JohnPayne on May 1, 2009 19:58:47 GMT -5
Really! Could you still use it? I hope you can. Thank for the heads up on the heads and crank both of you. I guess he is buying a new set of heads.
Thanks
|
|
|
|
Post by james "turbo" jr on May 6, 2009 11:51:25 GMT -5
yell it was fine at .040 but will have to turn down power and boost until i get me a dart block!!!
|
|
